Cost-Cutting Essentials

How to compare laundry detergent by cost per wash

Calculate detergent cost per declared wash, adjust for label dosing and compare powder, liquid and capsules with a blank two-pack worksheet.

Camille Durand Camille Durand β€’ Published β€’ Updated β€’ 9 min read
Two people stand behind a box of powder, a bottle of liquid detergent and a tub of capsules, with price tags and a calculator on the counter.

TL;DR

Divide the price of the exact detergent pack by its declared washes for a cost per wash, then adjust for the dose your product and loads actually need, because some loads take more liquid, powder or a second capsule.

To calculate laundry detergent cost per declared wash, divide the price of the exact pack you can buy by its labelled wash count. Multiply by 100 to get pence if the price is in pounds. But a declared wash is not a promise of one usable load in every household: powders and liquids can need different doses, and some capsules need two for particular loads. Check the exact pack’s dosing directions before deciding which costs less for your wash. Then confirm the offer you qualify for and any extra cost of buying it.

1

Match the exact packs

Compare the same brand, formula, variant, pack quantity and declared wash count.

2

Work out cost per declared wash

Pence per declared wash = 100 Γ— eligible pack price (Β£) Γ· declared washes.

3

Adjust for your dose

Use the dosing directions for your exact product and load, since powders, liquids and capsules can need different doses.

4

Use the price you can actually pay

Only enter an offer price you qualify for, and count an extra delivery fee only when buying this detergent adds it.

Start with the declared cost per wash

Use pence per declared wash = 100 Γ— eligible pack price (Β£) Γ· declared washes. For example, a fictional Β£8 pack labelled 40 washes would be 100 Γ— Β£8 Γ· 40 = 20p per declared wash. The same arithmetic applies to powder, liquid and capsules.

Price per litre or per kilogram helps compare similar quantities, but a litre of liquid cannot be directly compared with a kilogram of powder without knowing the dose in each product. Lower detergent cost also does not prove equivalent cleaning performance, suitability for skin or environmental impact.

Make the packs comparable

Before dividing, match the precise brand, formula (such as bio or non-bio), product variant, pack quantity and wash count. Note the total content in grams, millilitres or capsules; don’t treat those units as interchangeable. Two shop pages with similar names and sizes do not establish a matching barcode or an identical product version.

For capsules, count the individual capsules as well as the declared washes. For powder, measure a gram-based label dose in grams, not millilitres from an unverified scoop conversion: this specific Persil powder listing describes 50g for medium soiling in medium-hard water, while Persil’s generic scoop guide describes scoop volume in ml.

Historical illustration: advertised Tesco item prices seen in indexed pages on 16 November 2026 β€” not live checkout prices

These are ordinary advertised item amounts observed in public indexed pages on 16 November 2026, not proof that they were the prices paid at a till or checkout on that date. The sources were not a simultaneous live-price survey: the powder listing had an older crawl than the other two. The conditional buy-four-or-more Clubcard promotion shown on the Tesco listing is excluded.

Specific Persil non-bio pack Listed quantity / declared washes Advertised item price in the 16 Nov 2026 indexed-page observation Pence per declared wash Source
Non Biological powder 3,000g / 60 Β£12.50 20.83p (1,250 Γ· 60) Tesco powder listing
Non Bio liquid 1,431ml / 53 Β£10.00 18.87p (1,000 Γ· 53) Tesco liquid listing
Non Bio 4-in-1 capsules 48 capsules, 652g / 48 Β£11.75 24.48p (1,175 Γ· 48) Tesco capsules listing
⚠️

These three historical, advertised, one-dose figures do not rank every detergent format or establish today’s cheapest purchase. The usable count and price you pay may differ.

When a declared wash uses more detergent

Use the dose specified for your exact product and the relevant load conditions, rather than treating the stated number of washes as guaranteed. The pack’s declared wash count is a reference, not a measure of what all households use.

For loose detergent with a known quantity and a dose in the same units, use pence per dose-equivalent load = 100 Γ— eligible price (Β£) Γ— applicable dose (g or ml) Γ· pack quantity (g or ml). For capsules use 100 Γ— eligible price (Β£) Γ— capsules per load Γ· capsules in pack.

Liquid: 27ml and 40ml are different costs

The specific 1,431ml Persil liquid listing describes 27ml for a standard 4–5kg load and 40ml for a larger load or hard water. On the 16 November 2026 indexed-page advertised Β£10 item-price illustration, the proportional costs are 100 Γ— 10 Γ— 27 Γ· 1431 = 18.87p and 100 Γ— 10 Γ— 40 Γ· 1431 = 27.95p per dose-equivalent load.

At 40ml, 1,431ml provides 35 complete doses with 31ml left. 27.95p is the proportional cost of 40ml used, not the whole-bottle spending divided by completed washes. If you obtain only those 35 full loads and do not use the remainder, the Β£10 bottle costs Β£10 Γ· 35 = 28.57p per completed load in this historical illustration. Neither calculation assumes how a household will use leftover detergent.

Capsules: one versus two changes the count

Persil’s specific Non Bio 4-in-1 guidance directs one capsule for standard soiling in a 3–5kg load with soft/medium water; it says two for heavy soiling and hard water or a larger 6–8kg load. Under the 16 November 2026 indexed-page Β£11.75 / 48-capsule illustration, one costs 24.48p per load and two 48.96p. If every load requires two, the pack covers 24 complete loads. Do not apply that two-capsule rule to every brand or every load; a generic one-capsule Persil guide cannot override this product’s more specific instructions or your current pack label.

Use the price you can actually pay

Enter an offer price only if it applies to your basket, membership, qualifying product, quantity and shopping channel. Otherwise use the ordinary price you can actually obtain. Check stock, product variant and the basket at checkout before treating any figure as a payable amount. For more on member-only offers, see Herm’s guide to comparing loyalty prices.

πŸ’‘

Delivery fees

Consider a delivery or separate-order charge only when buying this detergent actually adds that cost. If your planned grocery shop costs the same with or without it, its incremental delivery fee is Β£0; do not assign the entire existing grocery delivery charge to one bottle. If an extra cost is unknown, do not enter Β£0 merely to finish the maths.

Fill in your own cost-per-wash comparison

Copy these blank columns for two actual products. Keep item-only results separate from any fee-adjusted comparison; write β€œunknown” where price, pack identity, dose or fee cannot be confirmed.

Field to fill in Pack A Pack B
Date and retailer / shopping channel
Exact brand, formula, variant and format
Total quantity Q (g, ml or count N capsules)
Declared washes W
Exact-label reference dose and relevant conditions
My appropriate dose D (g/ml) or K capsules
Eligible advertised item price P (Β£) and offer condition
Extra attributable purchase fee F (Β£, Β£0 or unknown)
Declared wash cost 100P/W (p)
Adjusted detergent-only cost 100PD/Q or 100PK/N (p)
Estimated complete usable loads L; dose mix and remainder
Optional whole-pack detergent spend 100P/L (p/complete load, if remainder unused)
Optional fee component 100F/L (p/complete load), shown separately
Optional whole-pack + fee spend 100(P+F)/L (p/complete load, if remainder unused and inputs known)
Unknown information / source to recheck
  1. Fill each product’s actual numbers and conditions first. For powder/liquid, use matching g/g or ml/ml in 100PD/Q; for capsules use K capsules per load divided by N capsules in the box. Enter the declared cost using 100P/W, too.
  2. Record L, the number of complete usable loads at your relevant dose (or estimated mix of doses), and any remainder. For a genuinely attributable extra fee F, the separate fee allocation is 100F/L pence per complete load. If the remainder will not be used, the whole pack costs 100P/L pence per completed load; the optional whole-pack plus fee total is 100(P+F)/L. This total spreads all the money spent across the completed loads. It is not the sum of proportional 100PD/Q (or 100PK/N) and 100F/L, because those can use different denominators when detergent remains. For mixed loads, estimate L using the relevant dose instructions and planned mix, or mark it unknown. Never replace an unknown fee with Β£0 or make an all-in total while L or F is unknown.
  3. Compare both packs under the same kind of measure: proportional detergent used per relevant load or, if leftovers will not be used, whole-pack spend per completed load (with separately identified extra fees if any). A lower valid figure is a cost result under those assumptions, not a cleaning-performance verdict.

Frequently asked questions

Divide the price of the exact pack by its labelled wash count, then multiply by 100 to get pence if the price is in pounds. A fictional Β£8 pack labelled 40 washes works out at 20p per declared wash.

No. A declared wash is not a promise of one usable load in every household. Powders and liquids can need different doses, and some capsules need two for particular loads.

Not directly. A litre of liquid cannot be compared with a kilogram of powder without knowing the dose in each product.

No. A lower detergent cost does not prove equivalent cleaning performance, suitability for skin or environmental impact.

Only when buying this detergent actually adds that cost. If your planned grocery shop costs the same with or without it, its incremental delivery fee is Β£0. If an extra cost is unknown, do not enter Β£0 just to finish the maths.

If the label, listing or offer does not match

First check the exact current pack label against the seller’s dated listing and, where possible, the manufacturer’s product-specific instructions. If price, eligibility, stock or checkout differs, ask the retailer to clarify that offer; if the dosage or wash count is unclear, ask the manufacturer about the exact variant. Recalculate with confirmed numbers. If a key input remains unresolved, mark that worksheet entry β€œcannot calculate yet” and compare another product rather than guessing a winner. For broader shopping-cost decisions, see Herm’s grocery planning guide.

#laundry-detergent #cost-per-wash #price-comparison
Camille Durand

Written by

Camille Durand

Contributor

I'm a marketing analytics expert and data scientist with a background in civil engineering. I specialize in helping businesses make data-driven decisions through statistical insights.

More from Camille

Related Articles